|
WGC-4 Pacific Pumper |
Specifications |
- The Pacific WGC-4 Pump Unit is an efficient unit
designed to meet the requirements of all Fire Control
Techniques. The performance range of this unit provides a
dual purpose, High Pressure for fire fighting or Large
Volume so that the same pump could be used for filling tanks.
- Specifically designed for mounting on tankers or self-contained
sip-on units. The lower speed four stroke single cylinder engine
reduces vibration on fixed applications and prolongs engine life. A
precision built gear box increases pump RPM to provide a remarkable
performance.
- The pump is designed to take rough treatment, handle muddy water and
can be run by unskilled operators.
- The quick action method of coupling pump to engine simplifies
servicing and transporting.
- The high quality of materials and workmanship insures dependable
operation with a minimum of maintenance.
Note: All units furnished with exhaust ejector priming will be
equipped with an automatic manifold check valve located at discharge end
of pump. This valve has a 1" NPSH (11 1/2 T.P.I) threaded male
fitting for connecting to live hose reel and a 1 1/2" NH (9 T.P.I.)
or 1 1/2" NPSH (11 1/2 T.P.I.) threaded male connection for overboard
or direct pumping operation.
|
Engine |
One cylinder 4 stroke air cooled |
| Power Rating |
9.2 H.P. at 3600 RPM |
| Bore |
3" |
| Stroke |
3 1/4" |
| Starting |
Rope, 12 volt electric option |
| Pump |
Horizontal 4 stage centrifugal, precision
built and corrosion resistant |
| Pump Suction |
2" N.P.S.H. (11 1/2 T.P.I.) |
| Pump Discharge |
1 1/2" N.P.S.H. (11 1/2 T.P.I.) or1
1/2" N.H. (9 T.P.I.) |
|
Dimensions |
| Length |
35" |
| Width |
20" |
| Height |
23" |
|
Weight |
| Rope Start wo/exhaust primer |
170 lbs. |
| Rope Start w/exhaust primer |
185 lbs. |
|
Options Available (
Specify when ordering) |
Electric Start wo/exhaust
primer |
190 lbs. |
| Cat. Number |
Description |
| 1-020 |
WGC-4 Pumper unit, Rope Start wo/exhaust ejector
priming |
Electric Start w/exhaust
primer |
205 lbs. |
| 1-021 |
WGC-4S Pumper unit Rope and 12V electric start wo/exhaust
ejector priming |
| 1-022 |
WGC-4P Pumper unit, Rope start w/exhaust ejector
priming |
Pumper Performance |
| Pressure |
GMP |
| Free Flow |
89 |
| 50 |
82 |
| 100 |
70 |
| 150 |
57 |
| 1-023 |
WGC-4SP Pumper unit, Rope and 12V electric start
w/exhaust ejector priming |
200 |
40 |
| 250 |
12 |
| 275 |
Shut-Off |
